Contact us
中文
VIOB-CAN-05
Compliant with SAE J1708 interface
SAE J1578/J1922 OBD protocol supported
mini-PCIe form factor for easy & quick installation
Alternative USB interface (signal shared with mini-PCIe)
Wide-range operating temperature
ESD and electrical ioslated protection
- Introduction
- Specification
- Order
- Download
VTK-CAN-05 module is a one-port high-speed SAE J1708 interface for USB. With mini-PCIe form factor design and a built-in 4-pin wafer by USB signal, it is easy and quick installation on any device to communication with commercial vehicle ECU. To satisfy server vehicles environments, VTK-CAN-05 can be operated on a wide-range operating temarature from -40°C to 85°C. Besides, it is built-in electrical isolation of 2.25KV and ESD level ± 8KV /15KV (contact/air) according to IEC 61000-4-2 to protect the system.
| Form Factor | mini-PCIe form factor |
| PC Interface | USB 2.0 (VCP, baud rate 57.6kbps) |
| I/O Connector | 4-Pin wafer connector (USB 2.0 I/F) DB9 connector for J1708 (w/ an external cable |
| SAE J1708 | Fully compatible with the ELM325 AT command set Support for SAE J1578/J1922 OBD protocol Works with standard RS485 transceiver |
| Dimension | 51mm (L) x 30mm (W) (2.01" x 1.18") Weight: 13g |
| Environment | Operating Temperatures: -40 ~ 85°C Storage Temperatures: -40 ~ 90°C Related Humidity (with system chassis): 5% ~ 90% |
| Electrical Protection | IEC 61000-4-2 Electrostatic Discharge (ESD): ± 8KV /15KV (contact/air) Isolation protection: 2.25KV |
| VCP Driver | PL2303HXC Windows XP/7/8/10, Android 3.2 (above) Linux kernel 3.x (above) |
VTK-CAN-05 (P/N: 10VK00CAN06X0)
SAE J1708 module, full-size mini-PCIe form factor, USB 2.0 interface
