Contact us
中文
VIOB-CAN-04-RAG
Dual CAN Bus 2.0B
mini-PCIe form factor for easy & quick installation
Compliant with ISO 11898-1 and ISO 11898-2
Support bit rate up to 10 kbps ~1 Mbps
Wide-range operating temperature
ESD Protection
- Introduction
- Specification
- Order
- Download
VTK-CAN-04-RAG module is a two-port high-speed CAN bus interface for USB. With mini-PCIe form factor design, it is easy and quick installation on any device to communicate with the vehicle ECU. It complies with standard CAN2.0A and CAN2.0B according to ISO 11898-1, ISO 11898-2 with bit rate up to 1Mbit/s. To satisfy server vehicles environments, VTK-CAN-04 can be operated on a wide-range operating temperature from -40°C to 85°C. Besides, it is built-in ESD level ± 8KV /15KV(contact/air) according to IEC 61000-4-2 to protect the system.
| Form Factor | Full size mini-PCIe (USB 2.0) form factor |
| I/O Connector | DB9 connector for 2 x CAN 2.0 B |
| Dual CAN 2.0B Port | Compliant with ISO 11898-2, ISO 11898-1 (11-bit and 29-bit ID) Speed: 10k bps ~1M bps Dual 120 Ohm line termination, enabled/disabled by dip switch |
| Dimension | 51mm (L) x 30mm (W) (2.01" x 1.18") Weight: 13 |
| Environment | Operating Temperatures: -40 ~ 85°C Storage Temperatures: -40 ~ 90°C Related Humidity (with system chassis): 5% ~ 90 |
| Electrical Protection | IEC 61000-4-2 Electrostatic Discharge (ESD): ± 8KV /15KV (contact/air) |
| Software | VIOB-CAN-04-RAG SDK |
VTK-CAN-04-RAG (P/N: TBD)
2 x CAN Bus 2.0B, full-size mini-PCIe form factor, USB 2.0 interface, DB9 cable
