Contact us
中文
MVS 2620-IP
IP65-rated rugged design
Intel Atom® x7, 4c, 2.0GHz E3950 (Apollo-lake)
9~36VDC with ignition control
Built-in GPS with optional dead reckoning
Up to two WLAN or two 3G/LTE via 3 mini-PCIe slots
Electrical isolation for CAN 2.0B & GPI/O
Optional OBD function (SAE J1939/J1708)
Rich and various GbE, USB 2.0, serial I/O and storages
Compliant to E-mark and ISO 7637-2
Compliant to MIL-STD-810G in vibration/shock
- Introduction
- Specification
- Order
- Download
MVS 2620-IP, an IP65-rated rugged enclosure, maintenance-free box computer, is ideal for data acquisition in extreme environments throughout a number of in-vehicle applications, like transportation, heavy duty and waste management, etc. All external interfaces, including Gigabit Ethernet, isolated CAN bus and digit I/O, USB, and RS232/485 serial ports, are implemented on IP67-proof connectors for reliable data transmission in harsh and rugged environments.
MVS 2620-IP is a modular design, it is flexible to use other kinds of expansion boards to extend different I/O functions for quickly tailored to a vast number of applications. Inside the system, there’re four mini-PCIe slots with three SIM card slots offering WLAN, 3G/LTE, CAN OBD (SAE J1708/J1939) or CVBS functionality. Besides, it can operate at temperatures from -30°C to +70°C under fanless.
MVS 2620-IP supports 9~36VDC power input with ignition managemnt and 12VDC at 2A maximun power output. It is compliant to E-mark and ISO 7637-2 in vehicle certificate and meet US military MIL-STD-810G, category 4, composite wheeled vehicle, for vibration and shock criteria.
| CPU | Intel Atom® x7, 4C, 2.0GHz E3950 (Apollo Lake) |
| Memory | 204-pin DDR3L SO-DMIM socket support 1600MHz up to 8GB, 4GB industrial grade memory in default |
| Storage | 1 x 2.5" SATA 3.0 SSD/HDD 1 x CFast (externally acessible) |
| GPS and On Board Sensor | 1 x default U-blox NEO-M8N GNSS module for GPS/Gloness/QZSS/Galileo/Beidou Optional modules with Dead Reckoning available Built-in G-sensor |
| Ethernet | 2-port 10/100/1000 Mbps Controller: Intel® 1210-T1 |
| Security | TPM in option |
| I/O Interface-Front | 6 x LED indicators for power/storage/WLAN/WWAN/Status/Health 1 x USB type A USB 2.0 port (w/ lid) 1 x SIM slot (w/ lid) 1 x Mic-in, 1 x Line-out, power & reset buttons for M12 connector 3 x antenna holes for WWAN/GPS One expansion port (M12-type) reserved |
| I/O Interface-Rear | Circular 22-pin: - 3x RS-232 (two for full, RI/5V/12V selectable) M12 8-pin: - 1 x GbE M12 8-pin: - 2 x USB 2.0 M12 12-pin: - 3-bit GPO & 3-bit GPI - iButton M12 12-pin: - 1 x Line-out - DC12V-out, 2A max. - OBD from optional VIOB-CAN-05/06 module (SAE J1708/J1939) - 2 x CAN Bus 2.0B from optional VIOB-CAN-04 module Circular 31-pin: - 1 x VGA, resolution up to 2560 x 1600 @60Hz - 1 x GbE - 2 x RS-485 (2-wire) - 1 x CAN 2.0B w/ isolation 6-bit DIP switch (w/ lid) 3 x Digital inputs - Source-type: 9~36V-in (default) -Eexternal-type: 0~33VDC pull-high -Isolation 3 x Digital outputs - Source-type: 9~36V-in (norminal 35mA@24V) (default) - External 5~27VDC pull-high, sink current: typical 220mA for each bit, 500mA max (@25°C) - Isolation Source or external selected by 6-bit DIP Switch 1 x SIM card socket (w/ lid) and 1x internal SIM card socket selectable 4 x antenna holes for WLAN/WWAN 1 x M12 S-code for 9~36VDC-IN |
| Power Management | Selectable boot-up & shut-down voltage for low power protection by software. Setting 8-level power on/ off delay time by software. Support S3/S4 suspend mode |
| Operating System | Windows 10 64-bit only, Linux YOCTO |
| Dimensions | 260mm (W) x 198mm (D) x 50mm (H) (10.24" x 7.80" x 1.97") 2.88kg |
| Environment | Operating temperatures: -30°C~70°C (w/ industrial SSD) with air flow Storage temperatures: -40°C~80°C Relative humidity: 10% to 90% (non-condensing) Vibration (random): - 1.2g@5~500 Hz (in operation, HDD), 2.5g@5~500 Hz (in operation, SSD) Vibration (SSD): - Operating: MIL-STD-810G, 514.6C, Category 4 - Storage: MIL-STD-810G, 514.6, Category 24, minimum integrity test Shock (SSD/HDD): - Operating: MIL-STD-810G, Method 516.6, Procedure I, functional shock=20g - Non-operating: MIL-STD-810G, Method 516.6, Procedure V, crash hazard shock test=75 |
| Certifications | CE approval, FCC Class A, E13 |
MVS 2620-IPK (P/N: 10VS0262000X0)
Intel Atom® 4c E3950 (Apollo-lake) 2.0GHz, 4GB DDR3L industrial grade, 2 x GbE, VGA output, 3 x RS-232, 2 x RS-485, 3 x USB2.0, 12VDC output, 1 x CAN 2.0B
Cables Kit (P/N: 10VS0262001X0)
External cables for all the communication ports
