Contact us
中文
VMC 110/111
7" 1024 x 600 TFT LCD monitor with resistor touch screen
ARM® Cortex®-A9 Dual Core Processor with 1GHz frequency
Compact and fanless design
On screen F1 ~ F5 programmable function keys
Linux and Android operating system
GPS/Wi-Fi/3G/LTE supported (Dead Reckoning included)
iButton & RFID for ID identification
Dual CAN Bus 2.0B
OBDII (ISO15765-4)/SAE J1939 protocol
Wide Range DC input from 9 ~ 36V
SW Utility for function demonstration on Android platform
CE/FCC/Emark
- Introduction
- Specification
- Order
- Download
VMC 110/111, a 7-inch all in one mobile data terminal , targets the fleet management, transportation and logistic applications. Its compact and rugged design with flexible expansion capability is perfect to the limited space on the driver cabinet and strog requirement on the wireless communication. For wireless communication, VMC110/111 is capable of supporting GPS, Dead Reckoning, Wifi, 3G and LTE. Besides, VMC 110/111 works on the both of Android and Linux operating systems, which are the main stream of operating system in the future. 7" 1024 x 600 resolution with 500nits brightness and resistive touch is suitable on the driver cabinet. Abundant I/O support, such as 2 x CAN bus 2.0B, OBDII/J1939, RS232, RS485, USB, GPIO, LAN… can help to get real-time vehicle information and connect with different sensors or equipment, such as ticketing machine, RFID scanner..... VMC 110/111 with Android and Linux platform is no doubt suitable to implement into various truck, forklift, crane... in port, transportation and logistic application.
| LCD Panel | 7-inch TFT LCD Panel with LED Backlight 1024 x 600 pixels Brightness: 500 cd/m² (typical) Contrast ratio: 800:1 (typical) Viewing angle: 150(H), 145(V) |
| Touch Screen | 4-wire resistant touch Anti-glare coating surface Transmission rate: 80% ± 3% |
| CPU & Chipset | ARM® Cortex®-A9 Processor with 1GHz frequency Freescale Dual Core |
| Memory | Onboard DDR3L 2GB |
| Storage | 1 x Micro SDHC Slot EMMC: 8G on board |
| Expansion | 1 x Half-size mini-PCIe (PCIe + USB) for WLAN 1 x Full-size mini-PCIe (USB + UART) for WWAN OBDII: ISO15765-4 & SAE J1939 (Default: None, BOM optional) RFID (optional) |
| I/O Interface-Front | F1 ~ F5 programmable function keys Light Sensor Internal Mic-in 2 x Built-in 2W speakers 3 x LED indicators (Power, Storage and WWAN) |
| I/O Interface-Lateral | Right side - 1 x SIM card slot - 1 x Micro SD card slot - 1 x USB 2.0 type A - 1 x micro USB OTG for maintenance Left side - 1 x Power button - 1 x Volume up/down - 1 x Brightness up/down - 1 x System reset button |
| I/O Interface-Rear/Bottom | 1 x lockable power input with ignition 1 x RJ45 for LAN 2 x USB 2.0 Type A - DB-15 connector - Full RS-232 - RS-232/485 - CAN1 2.0B DB-15 connector - GPI x 3 Sink type: 5VDC TTL (default) Source type: 3 ~ 28VDC - GPO x 3 Sink type: 5VDC TTL (default), max current: 20mA Source type: 3 ~ 28VDC, max. current: 150mA - GPS DR (Speed, direction, GND) - CAN2 2.0B (Default) & (BOM optonal for OBD II (ISO 15765-4 & J1939)) - iButton 1 x Mic-in 1 x Line-out 3 x Antenna on I/O - Rear: 1 x GPS, 1 x WWAN - Bottom: 1 x GPS, 2 x WWAN 2 x Antenna on housing for Wi-Fi |
| Mechanical | Cooling System: Fanless Enclosure: Plastic PC/ABS + Metal heat-sink Mounting: VESA 75/100 & Desktop mounting Ingress Protection: Front panel IP54 Dimension: 212.9mm (W) x 144.97mm (H) x 40mm (D)(8.4" x 5.7" x 1.6") Weight: 1.3kg |
| Power Management | 9V~36V DC input Selectable boot-up & shut-down voltage Ignition: 8-level delay time on/off Reverse protection/over-voltage protection/low-voltage protection Wake up by SMS/RTC/ignition |
| Operating System | Linux YOCTO 2.0 by Request Android 5.1 |
| Environment | Operating temperatures: Ambient with air -20°C to 70°C Storage temperatures: -30°C to 80°C Relative humidity: 10% to 90% (non-condensing) Vibration Vibration test: IEC 60068-2-64, 2.5G Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4 Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24 Shock MIL-STD-810G, 516.6 Procedure 1, trucks and semi-trailers=40g Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75 |
| Certification | CE/FCC class B/E-Mark |
VMC 110 (P/N: 10VC0110005X0)
VMC 110-D1A 7" I/O on the back w/i.MX6 Dual Lite, 2GB, 8G EMMC, 4w T/S, Android
VMC 111 (P/N: 10VC0111000X0)
VMC 111-D1A 7" I/O on the bottom w/i.MX6 Dual Lite, 2GB, 8G EMMC, 4w T/S, Android
